Licensed plumbers servicing Stanmore
Rapid Service Plumbing services Stanmore and the surrounding Inner West. Pressure and tap problems are among the most common calls we take, and the cause is often simpler than people expect. Call the Sydney office on 02 9099 9138.
WITH OVER 340 REVIEWS AUSTRALIA-WIDE
Google rating
Local. Licensed. Fixed price.
The first useful question with any pressure complaint is whether it affects the whole property or one outlet.
One tap with poor flow usually has a local cause: a blocked aerator, a partly closed isolating valve, or a worn cartridge. The whole property behaving poorly points further back, to the main supply, a pressure limiting valve, or supply pipework that has narrowed over time.
That distinction takes a minute to establish and it changes the entire diagnosis, so it is worth checking a few outlets before calling.
What we fix in Local Plumber Stanmore
Blocked drains and camera inspections, hot water repair and replacement, burst and leaking pipes, taps and toilets, gas fitting, roof plumbing and gutters, and bathroom and kitchen plumbing.
24/7 Emergency
A dripping tap is not just waste. It is a worn component telling you it has reached the end of its life.
Traditional taps seal with a washer pressing onto a seat. When the washer wears, the tap drips. Left long enough, the seat itself scores, and then a new washer will not seal either, which turns a minor repair into a tap replacement or a seat reseating.
Mixer taps work differently, using a cartridge rather than a washer. When a mixer drips or becomes stiff, the cartridge is usually the part at fault, and cartridges are specific to the model rather than universal.
Water hammer is a related complaint worth mentioning: a bang in the pipes when a tap or appliance shuts off quickly. It is caused by moving water stopping abruptly, and over time the shock can loosen joints, so it is worth addressing rather than tolerating.
If a hot water system is leaking, making unusual noises, or delivering water hot enough to scald, switch it off at the isolation point if you can do so safely and call a licensed plumber. Tempering valves and pressure relief valves are not do it yourself items, and a failed relief valve can be dangerous.
Reason 01
Rapid Service Plumbing is a licensed plumbing business and our licence details are published on this site. Plumbing, drainage and gas fitting are licensed trades in New South Wales, and every plumber who attends a job in Stanmore is licensed for the work they carry out.
Reason 02
You get a written quote before any work starts, covering labour, parts and any other costs. If we find something unexpected once we are on site, we stop and talk it through with you before going further.
Reason 03
A drain that keeps blocking or a tap that keeps dripping usually has an underlying reason. Where it matters we will investigate properly, including a camera inspection on drainage, so you are deciding with the full picture rather than paying twice for the same problem.
Reason 04
Repair and replacement are often both possible, and they suit different situations. We will tell you what each involves and what it means for the life of the fixture, then leave the decision with you.
Reason 05
Gas, hot water and anything involving water near electrical fittings carry real risk. We will tell you plainly when something should not be attempted at home and when a licensed professional needs to handle it.
Why Local Plumber Stanmore calls us
Call the Sydney office on 02 9099 9138. If you have checked whether the problem affects one outlet or the whole property, tell us, because it saves diagnostic time.
FAQ
Questions we are regularly asked. If yours is not answered here, call the Sydney office on 02 9099 9138.
Most often a blocked aerator at the spout, which catches sediment and is simple to clean or replace. Other possibilities are a partly closed isolating valve under the fixture or a worn cartridge. Because it affects one outlet only, the cause is almost certainly at or near that fixture.
A whole property issue points to something common to the whole supply: the main, a pressure limiting valve that has failed, or supply pipework that has narrowed internally over many years. If it has declined gradually rather than suddenly, narrowing pipework is a common explanation.
That is water hammer, caused by moving water being stopped suddenly. Beyond the noise, the repeated shock can work joints loose over time, so it is worth fixing. Solutions include arrestors or adjusting pressure, depending on the cause.
No. A standard tap usually needs a washer, and sometimes the seat reground if it has scored. A mixer uses a cartridge, which is specific to the model. Knowing the brand and model helps considerably when a cartridge is needed.
Yes. Before work begins, we provide a written quote covering labour, parts and any other costs.
Locations
Proudly Serving The City Of inner west
