Gas fitting Sydney
Need a gas plumber in Sydney for a leak, a new cooktop or a gas heater connection? Our licensed gas fitters repair, install and certify gas work, and leave you with the paperwork NSW requires. Gas fitting all over Sydney, any hour of the day or night, with $0 call out.
Call 24 hours02 9099 9138- $0 Call Out
- Within the Hour
- 0% Interest Available
- Licensed #379146C
Book a plumber
Tell us which appliance or gas line the job is on and whether you can smell gas. If you can smell gas right now, get outside and phone us instead of filling in the form.
Our iron clad guarantee
- Complimentary safety inspection includedEvery job comes with a complimentary whole-system safety inspection for complete peace of mind.
- 100% satisfaction or we fix it freeNot happy with our work? We’ll come back and make it right at no extra cost.
- Full year warranty on all partsEvery component we install is backed by a comprehensive 12-month warranty.
- Lifetime guarantee on workmanshipOur installation work is guaranteed for life. If it fails due to workmanship, we’ll fix it free.
The 24 hour plumbing service Sydney trusts
Did you know that while plumbing, drainage & gas fitters in Sydney may often be talked about in the same breath, the qualifications, licensing and hands-on experience requirements are all distinct? What do you need a Sydney gas fitter for:
Plumber within the hourPlumber within the hourPlumber within the hourPlumber within the hourPlumber within the hourDo you need an emergency gas fitter?
A gas smell is not something to investigate yourself. Some signs mean get out and call now, and some mean an appliance needs attention this week.
Act now
02 9099 9138Book a gas fitter
Act now
A strong smell of gas indoors
Open the doors on your way out, leave the house and ring 000 from outside. Do not switch anything on or off, and do not use a phone inside.
Book a gas fitter
A faint smell for a moment after lighting
A brief whiff when a burner lights can be normal. If it keeps happening, the burner or its connection needs checking.
Act now
A hissing sound near a pipe or bottle
Hissing means gas is escaping under pressure. Leave the area, keep ignition sources away and call for help.
Book a gas fitter
A burner that clicks for a long time before lighting
Slow ignition usually points to a dirty burner or a worn igniter, not a leak in the line.
Act now
Dizziness, headaches or nausea near a heater
Symptoms that ease when you step outside can mean the appliance is not venting properly. Get everyone out and call.
Book a gas fitter
Yellow or orange flames on the cooktop
A flame that is not mostly blue is burning poorly. It needs a service soon, but it is not an emergency tonight.
Act now
A damaged gas line after digging or a car strike
A cracked pipe or meter connection can leak outside where you will not smell it. Keep everyone back and call.
Book a gas fitter
A new appliance with no gas connection yet
Installing a cooktop, oven or heater is planned work. We book it, connect it and test it.
Not sure whether what you can smell is gas?
Call us and a licensed gas fitter will talk you through what to do while we head your way.
Answered 24/7$0 call out fee
Need a Sydney gas fitter?
At Rapid Service Plumbing, we provide the full suite of services that the pre-eminent Sydney plumbers and gasfitters can handle for you - including fully customised solutions that tick every box from compliance to fully guaranteed workmanship & beyond. Finding the best gas plumber Sydney-wide is an absolute must, as cutting a corner here or there not only risks damage & repair bills - working with gas is no joke and the consequences for shoddy workmanship can be fatal.
Our skilled & friendly Sydney gasfitters take real pride in offering 5-Star gas plumbing services for all residential, commercial or industrial settings.
- Licensed #379146C
- Fully stocked van
- Honest pricing
Do you have a gas leak?
A gas leak is never something to leave until Monday morning - so if you smell rotten eggs and yet everything is A-OK in the fridge, it’s crucial to deal with it straight away by calling our 24/7 gas and plumbing emergencies line on 02 9099 9138.
If you smell gas right now, here’s what to do:
- Turn off the gas at the meter
- Open doors & windows if safe to do so
- Get to a safe distance
- Call Rapid Service Plumbing - we’ll be right there!
Our most skilled gas plumbers Sydney-wide have all the specialist training, qualifications, licensing, insurance and hands-on experience to detect even the most hidden or minor gas leak before it causes any more trouble. Rapid Service Plumbing’s gas team can also handle all of your gas hot water service needs, new pipe installations, installation of ovens, cooktops, gas heater installations and repairs - and so much more!
Talk to a plumber now
Free advice over the phone at any hour, and no call out fee.
Need a Sydney gasfitter today?
Ready to get started? Our gas plumbers can be at your place in no time at all, so give the friendly team at Rapid Service Plumbing a call right now!
What a licensed gas plumber in Sydney can do for you
Gas fitter work is a separate licence from general plumbing. Pick the job you have in mind to see how a gas fitter handles it from start to finish.
If the smell is strong, get out first, then call. If it is faint, open windows, switch off the appliance and turn off the gas at the meter or the bottle.
We test the line and every joint with a pressure test and a leak detector, so we find the exact fitting rather than guessing. Then we repair or replace it.
The line is tested again before we hand it back, and we tell you in plain words what failed and whether anything else is close to it.
If the smell is strong, ring 000 from outside the house. Do not use light switches, power points or a phone inside while you leave.
Tell us the appliance: a cooktop, oven, heater, barbecue point or outdoor kitchen. We check there is enough gas supply and the right size of pipe for it.
We run the pipe, fit an isolation valve, connect the appliance and set it up to burn correctly. Anything that vents gets checked for clear flow.
We test the whole connection for leaks and show you how to isolate it. Then we supply the paperwork the work requires.
In NSW, a licensed gas fitter must test new gas work and certify it when the job is finished. The certificate is proof that the work was done to standard.
We lodge the certificate the way the rules require and give you a copy. You will want it for insurance, a sale or a landlord.
Gas work done without a licensed fitter can leave you with no certificate and an unsafe appliance. We can inspect it and tell you what needs to change.
Our guide sets out when the certificate is needed and what is on it, in answers to the questions people ask us most.
Gas heaters, hot water units and cooktops burn better when they are cleaned and checked. A yellow flame, soot or a lingering smell says the appliance is overdue.
We check connections, burners, flue and ventilation, and test for leaks along the line as we go.
You get a clear list of what is fine and what is not, and a price for anything that needs fixing, agreed before we do it.
How it works
How our gas fitting services work, from your call to a certified, tested job.
Tell us what you smell or need
Call 02 9099 9138 or book online. If you can smell gas, we tell you how to make the house safe first, then send a gas fitter.
Work order- $0 call out
- Answered 24/7
- Suburb and problem noted
Licensed #379146C, Sydney wide
Fit, repair and pressure test
Our gas fitters arrive with fully stocked vans, so most repairs and connections are done in one visit. Every joint is tested before the gas goes back on.
Work order- Licensed #379146C
- Fully stocked van
- Within the hour
Licensed #379146C, Sydney wide
Certified and handed over
We show you how to turn the gas off, give you the compliance paperwork the job needs, and mark the work with a complimentary safety inspection.
Work order- Free safety inspection
- 12 month parts warranty
- Lifetime workmanship guarantee
Licensed #379146C, Sydney wide
What gas fitting costs in Sydney
Gas work is priced by the job, not by a rate you have to guess at. You get the price before we start, and a leak is never a reason for a surprise.
Leak find or install
Finding and fixing a leak is quoted differently from installing a new line, because the time it takes depends on where the leak is hiding.
Length and size of pipe
A short run to a new cooktop costs less than a long run to a barbecue at the back of the yard. The pipe size is set by the appliance.
Natural gas or bottled gas
The two systems use different regulators, pressures and fittings. We price for the one you have.
Access to the line
A pipe in an open subfloor is quick to reach. One inside a wall or under a slab takes more care.
Testing and the certificate
Pressure testing and certification are part of every new job, and they take time we include in the price.
$0 call out fee
Any hour,
any day
- The price agreed before work starts
- Licensed gas fitters on every gas job
- Licensed #379146C, every plumber
Before you pay for gas work
NSW expects a compliance certificate for new gas work. Our guide explains what it covers and why you should always ask for it.
Gas Compliance Certificate NSW: Your Questions AnsweredAustralia’s favourite plumbing service provider
4.7
From over 340 reviews, Australia wide
“Sam from Rapid Service Plumbing came out and gave us a quote for job. He provided excellent information and was super clear about the work.”
“Anthony and Addison provided great knowledge and solutions to assist with our plumbing issue. Many thanks!”
“Fantastic service and fairly priced. Highly recommend!”
“Best service of all time, thanks SO much to the whole team”
“Sam, champion bloke. Great service. Greatly appreciated. Cheers mate.”
More plumbing services
All servicesKitchen Plumbing
View kitchen plumbingWater Leaks
View water leaksDrainage Solutions
View drainage solutionsHot Water System
View hot water systemEmergency Plumbing
View emergency plumbingBlocked Drains
View blocked drainsBathroom Plumbing
View bathroom plumbingAreas we cover
258 suburbs across 9 regions of Sydney, from the Hawkesbury to the Shire, with a plumber on call in each.
Choose your region
Frequently asked questions
What is gas fitting and what services do you provide?
Gas fitting covers the installation, maintenance, and repair of gas lines and appliances for homes and businesses. Rapid Service Plumbing provides expert gas appliance installations, gas leak detection and repair, new line installations, gas bayonet fitting, and system upgrades for both LPG and natural gas systems.
Why should I hire a licensed gas fitter like Rapid Service Plumbing?
Hiring a licensed professional, such as Rapid Service Plumbing, ensures every gas job is completed safely, complies with Australian regulations, and is fully insured. Expert gas fitters prevent hazards like leaks or carbon monoxide exposure and provide a compliance certificate for peace of mind and legal protection.
What are the signs of a gas leak in my home?
Warning signs include a strong rotten egg smell, hissing sounds near gas lines, bubbles in soapy water placed on connections, yellow or orange gas flames, and unexplained indoor plant death or physical symptoms like headaches or dizziness. If any of these occur, call Rapid Service Plumbing immediately for prompt inspection and repairs.
How often should my gas appliances be serviced for safety and efficiency?
It’s recommended to have all gas fittings and appliances professionally serviced at least once a year. Regular checks by Rapid Service Plumbing ensure safe operation, optimal performance, reduced risk of failure, and compliance with safety standards.
Is a gas plumber the same as a plumber?
Not quite. Gas fitting is its own licence in NSW, separate from general plumbing and drainage, with its own training and rules. Many plumbers hold both. Our licensed gas fitters can handle the pipework and the appliance, so you only need one call for the whole job.
Who should I call if I have a gas leak in Sydney?
If the smell is strong, leave the house, then ring 000 from outside. Do not turn lights or appliances on or off. For a faint smell or a suspected slow leak, shut the appliance off, ventilate, and call us. We test the line to find the source.
How much does a gas fitter cost in Sydney?
It depends on the job. A leak repair, a new connection and a full gas line are priced differently, based on pipe length, access and the appliance. There is nothing to pay to have us come out, and the price is agreed with you before any work begins.
Do I need a licensed gas fitter to connect a cooktop or heater?
Yes. In NSW, appliance connections and gas pipework are licensed work, and finished jobs need testing and a compliance certificate. Doing it yourself is unsafe, and it can void your insurance if something goes wrong.
What is a gas compliance certificate?
It is a record that new or altered gas work was tested and meets NSW standards. A licensed gas fitter issues it when the job is complete. Keep it with your property papers, because insurers and buyers often ask to see it.
Can you install gas for an outdoor kitchen or barbecue?
Yes. We run a pipe to a bayonet or a fixed point, add an isolation valve, and test the line. We also check the appliance suits natural gas or bottled gas before it is connected, because the two need different set-ups.
Which parts of Sydney do your gas plumbers cover?
Every corner of Sydney, from Hornsby and Manly down to Cronulla, out to Parramatta and Penrith, and across the Inner West and Eastern Suburbs. The nearest licensed gas fitter drives to you.
How do I know if my gas appliance needs servicing?
Watch for yellow or orange flames, soot marks, a pilot that keeps going out, or a lingering smell. Any of these means the appliance is burning poorly. Switch it off and book a service so a gas fitter can check the burner, flue and connections.
Get a free quote
Get obligation free plumbing quotes & guaranteed workmanship from our 5-star rated local Sydney plumbing team
